
Citrus Park Cabinet Refacing
Cabinet Refacing in Citrus Park, FL
Cabinet refacing in Citrus Park, FL. Keep your cabinet boxes, get new doors and finishes, and skip the full gut remodel. Free estimates.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Citrus Park and nearby communities.
Get a free estimate
Tell us about the project and how to reach you.
Cabinet Refacing
Cabinet Refacing for homes and businesses in Citrus Park
Kitchen looking dated, but the boxes are still solid? Gutting a whole kitchen is expensive and messy. Most of the time it's not even necessary.
Citrus Park Cabinet Refacing keeps your existing cabinet boxes in place and replaces the doors, drawer fronts, and exposed surfaces with new material. Citrus Park sits in unincorporated Hillsborough County, so permits and inspections route through county building services rather than a city hall. Many kitchens here were built during the 1990s and 2000s construction boom and still carry original oak or thermofoil boxes, which happen to be good refacing candidates.

What we do
Cabinet Refacing services
Cabinet Refacing across Citrus Park and the surrounding area.
Residential Services

Cabinet Refacing
New doors, matched veneer skins, and soft-close hardware installed over your existing cabinet boxes. Free estimates.
Learn more →
Kitchen Cabinet Refacing
Kitchen cabinet refacing in Citrus Park, FL. Matched doors, new veneer, hardware upgrades, free written estimates.
Learn more →
Bathroom Vanity Refacing
Bathroom vanity refacing in Citrus Park, FL with moisture-resistant finishes, matched doors, and free estimates.
Learn more →
Cabinet Door Replacement
Cabinet door replacement in Citrus Park, FL. Matched doors, drawer fronts, and hardware on existing boxes, free estimates.
Learn more →
Cabinet Refinishing & Painting
Cabinet refinishing and painting in Citrus Park, FL. Spray-finish paint and stain on existing doors, free estimates.
Learn more →
Custom Cabinet Doors
Custom cabinet doors in Citrus Park, FL for non-standard box sizes and unique panel styles, free estimates.
Learn more →
Kitchen Island Refacing
Kitchen island refacing in Citrus Park, FL to match new perimeter cabinets. Panel veneer, doors, and hardware, free estimates.
Learn more →
Thermofoil & Laminate Peeling Repair
Thermofoil and laminate peeling repair in Citrus Park, FL. Fix bubbling cabinet surfaces without a full kitchen gut, free estimates.
Learn more →
Looking for something else? Browse all services in the menu, or tell us about a custom project.
Why choose us
Why choose Citrus Park Cabinet Refacing
Box condition gets checked first
Every estimate starts with a hands-on look at your cabinet boxes, not a sales pitch for a full gut job.
Finish matched to the existing kitchen
Veneer and stain color get matched before install day, so new doors don't look bolted onto old boxes.
Materials picked for Florida humidity
We steer homeowners toward moisture-aware finishes built for AC cycling, not whatever's cheapest on the shelf.
Written estimates, no surprise change orders
You get a clear scope and price range up front, before any box prep or demo starts.
Have a project in mind?
Get a Free EstimateHow it works
How our Cabinet Refacing process works
Step 1Initial Consultation
A specialist checks your cabinet boxes and talks through style goals for your home.
Step 2Measurement & Design
We measure door sizes and finishes to fit kitchens built during Citrus Park's 1990s-2000s boom.
Step 3Material Selection
Homeowners pick veneers, finishes, and hardware suited to Florida's humidity swings.
Step 4Surface Preparation
Boxes get cleaned, sanded, and repaired so new material bonds correctly.
Step 5Refacing Installation
New veneers, doors, and panels get fitted to your existing cabinet frames.
Step 6Final Walkthrough
We confirm alignment, finish quality, and smooth hardware before closing out the job.
Ready to start?
Get a Free EstimateCost
Kitchen Cabinet Refacing Cost in Citrus Park, FL
Pricing depends mostly on door count, material grade, and whether hardware gets upgraded alongside the boxes. Here's the rough range homeowners see: These are ballpark figures, not a fixed quote. Call (727) 947-1609 for a free estimate based on your actual kitchen.
| Project type | Typical range | What’s included |
|---|---|---|
| Door-only replacement | $1,500–$5,000 | new doors and drawer fronts, box left in place. |
| Full kitchen box refacing | $5,000–$12,000 | new veneer skin, doors, and hardware across all cabinets. |
| Kitchen plus island | $8,000–$16,000 | matching finish across perimeter cabinets and a standalone island. |
| Bathroom vanity refacing | $1,200–$3,500 | scaled to a smaller cabinet count. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateMaterials
Materials and methods we use
Florida humidity and AC cycling put real stress on cabinet surfaces. These are the products we reach for most:

Wood Veneer Sheets
Thin wood veneers are applied over existing boxes for a refreshed natural look.

Laminate Finishes
Durable laminate options provide a cost-effective and easy-to-clean surface choice.

Solid Wood Doors
New solid wood doors replace old fronts for improved durability and appearance.

Cabinet Hardware
Knobs, pulls, and hinges are selected to match the updated cabinet style.

Soft-Close Hinges
Upgraded hinges provide quiet, smooth closing for all cabinet doors.

Protective Topcoat
A clear sealant layer protects finished surfaces from moisture and daily wear.
Questions on materials?
Get a Free EstimateTimeline
How long does cabinet refacing take?
Most projects move in a few predictable stages. Door fabrication is the longest wait, not the install itself.
- 01
Estimate and measure
same day - 02
Door fabrication
1–2 weeks - 03
Box prep and install
2–3 days - 04
Final punch list
same day
Need a schedule that fits?
Get a Free EstimateCodes & permits
Permits, codes, and compliance
Citrus Park and Cheval are both unincorporated Hillsborough County CDPs, so permitting runs through county building services rather than a separate city office. Always verify specifics with Hillsborough County building services before work begins.
| Typically needs a permit | Often no permit |
|---|---|
| Adding new electrical circuits for under-cabinet lighting | Door and drawer front replacement |
| Moving plumbing lines for a vanity relocation | Veneer or laminate skin application over existing boxes |
| Structural changes to cabinet box framing or load-bearing walls | Hardware swaps |
| — | including soft-close hinge retrofits |
| — | Paint or stain refinishing of existing doors |
Need help with permits?
Get a Free EstimateDIY vs pro
DIY vs hiring a Cabinet Refacing pro
| DIY | Hire a pro |
|---|---|
| Swapping knobs, pulls, and hinges. | Veneer alignment across multiple cabinet runs. |
| Basic touch-up painting on small areas. | Color and stain matching between new doors and old boxes. |
| Reinstalling hardware after a professional refacing job. | Box leveling and structural prep before new surfaces go on. |
| — | Full kitchen or island coordination where mismatched panels are obvious. |
Not sure DIY vs pro?
Get a Free EstimateWhen to call
When to call for Cabinet Refacing
Call (727) 947-1609 for a free estimate before small issues turn into bigger repair jobs.
- Thermofoil edges are starting to peel or lift.
- Doors feel warped or swollen from humidity exposure.
- Hinges won't hold screws anymore and doors sag.
- The oak finish just feels done, and you're ready for something current.
Seeing warning signs?
Get a Free EstimateWhere we work
Serving Citrus Park and nearby communities
Local pages for these communities. Nearby towns without a page are still in our service area.
Also serving
Northdale · Keystone · Westchase · Carrollwood · Lake Magdalene · Town 'n' Country · Egypt Lake-Leto · Odessa · Oldsmar · Lutz · and others
Outside these locations?
Before & after
See the work up close

Before 
After
Customer feedback
What local customers say

Barbara E.
5 days ago
5 out of 5 starsPrice was way more affordable than the other quotes we got for hardware upgrades. Still felt premium — clean jobsite, solid finish, and I'd hire them again without thinking twice.
Citrus Park, FL
Robert F.
3 weeks ago
5 out of 5 starsCalled Citrus Park Cabinet Refacing after a neighbor tip in Citrus Park. Super easy to deal with — clear answers, no runaround, and they actually cared about the details on our cabinet door replacement.
Citrus Park Town Center area, FL

Andrew L.
1 week ago
5 out of 5 starsHonestly did not expect such a professional team. They showed up on time, explained every step, and the countertop coordination turned out better than I pictured.
Lutz border, FL
Common questions
Cabinet Refacing FAQs
What's the average cost to reface kitchen cabinets?
Most Citrus Park kitchens run $4,000 to $12,000 for a full box refacing job, depending on door count, material, and whether hardware gets upgraded too. Smaller door-only jobs can run lower. The only way to get a real number is a measured estimate.
What is the downside of cabinet refacing?
Refacing keeps your existing box layout. If your kitchen needs a different footprint, more storage, or the boxes themselves are water-damaged, refacing won't fix that. It's a finish and door upgrade, not a layout change.
What kitchen cabinet colors will look outdated in 2026?
Heavy orange-toned oak stains and glossy honey finishes are losing ground fast. Stark all-white kitchens are also starting to feel dated next to warmer neutrals, soft greens, and two-tone combos.
Is it cheaper to replace cabinets or reface them?
Refacing typically costs 30 to 50 percent less than a full gut-and-replace project, since the boxes stay put and only the doors, drawer fronts, and exposed surfaces change. Full replacement makes more sense only if boxes are structurally compromised.
How much does Cabinet Refacing cost in Citrus Park?
Ballpark ranges run from around $1,500 for door-only swaps up to $15,000 or more for a full kitchen with an island. Material grade and door count are the biggest cost drivers. Call for a free estimate specific to your kitchen.
How long does Cabinet Refacing take?
A full kitchen refacing job typically runs two to three weeks from measure to final walkthrough, most of that being door fabrication lead time. Actual install days in your home are usually two to three.
Do I need a permit for Cabinet Refacing?
Standard refacing work is cosmetic and typically skips Hillsborough County permitting. If your project adds electrical for under-cabinet lighting or moves plumbing for a vanity, that piece may need county sign-off.
Is DIY Cabinet Refacing a good idea?
Swapping knobs and pulls is realistic for most homeowners. Veneer alignment across multiple cabinet runs, color matching, and door leveling are where DIY jobs tend to go sideways and cost more to fix later.
Ready for a clear estimate?
Tell us about the project, or call to talk through options in Citrus Park.
